Skip to content
AIRBOT P7 7-Axis Robotic Arm AIRBOT P7 7-Axis Robotic Arm
User Manual > Basic Functions

Power-On and Power-Off#

Before using AIRBOT P7, learn the power-on and power-off operations to establish a foundation for normal subsequent use. AIRBOT P7 does not lose its zero point, so the user does not need to perform zero calibration proactively.

  • Connection note: the robot-arm power interface is a 3-pin MR30-M. The plug has a keyed positioning structure. When wiring, align the locating ridge precisely to prevent reversed phases and ensure the direction is correct.

  • Power-on sequence: connect all cables first, making sure that the power connector and every interface are secure. Finally connect the three-prong power cable; the robot arm starts automatically.