Skip to content
GO2EDU&Play&Gripper Mobile Manipulation Kit QMMK Quadruped Dexterous Manipulation Platform
Quick Setup > Stage 4: VR Device Deployment and Instructions (PICO4)

Tips#

For a safer and smoother experience, we recommend the following:

  • Leave room for the robot: Before startup, provide a spacious, obstacle-free area for the robotic arm and GO2.
  • Put on all devices before starting: Make sure that the VR control devices are worn correctly and connected before starting.
  • Keep the GO2 moving: When carrying the robotic arm, the GO2 can overheat if it remains standing still for too long. Move it occasionally.
  • Follow the correct shutdown sequence: At the end of operation, release the trigger first and then press the stop button to reduce the risk of accidental input.
  • Remember the essential safety measure: If the robotic arm moves out of control, do not panic. Disconnecting its power supply immediately is the most effective way to stop it.